Concept Guide

4
Port Configuration
The Port Configuration page is where you can configure various port settings on an I/O Aggregator
device.
This page consists of the following sections:
• Port Settings
• Uplink Ports
• Uplink Failure Detection
• Combo Port (FN2210S SKU FN IOA for FX2 devices only)
Port Settings
The Port Settings section of the Port Configuration page displays in circular graph format the number of
configured external and internal ports of the I/O Aggregator device.
NOTE: You can only edit these settings for M1000e and FN IOA devices in standalone or VLT mode.
In the circular graphs, blue represents configured ports.
From this section you can:
• View port configurations
• Configure port settings
Viewing Current Port Configurations
From the Port Settings section of the Port Configuration page, you can view all current port
configuration settings on the I/O Aggregator device.
M1000e devices have a maximum of 32 internal ports and 24 external ports. FX2 devices have a
maximum of eight internal ports and four external ports.
NOTE: You can only edit these settings for M1000e and FN IOA devices in standalone or VLT mode.
1. From the navigation menu, click Port Configuration.
The Port Configuration page appears.
2. In the Port Settings section, click View Port Configurations.
The Current Port Configurations dialog box appears, listing the following information for each
configured port:
• Interface — Displays the interface type with chassis slot and port number.
• Description — Displays the user-configured description of the port.
• Port Type — Displays the port type: Internal, Copper, Fibre, QSFP, or SFP+.
• Link Status — Displays whether the port link is Up or Down.
19