Command Line Reference Guide

NOTE: After debugging is complete, use the no debug cpu-traffic-
stats command to shut off traffic statistics collection.
Example
Dell#show cpu-traffic-stats
Processor : CP
--------------
Received 100% traffic on TenGigabitEthernet 8/2 Total
packets:100
LLC:0, SNAP:0, IP:100, ARP:0, other:0
Unicast:100, Multicast:0, Broadcast:0
Dell#
Related
Commands
debug cpu-traffic-stats — enables CPU traffic statistics for debugging.
show debugging
View a list of all enabled debugging processes.
Syntax
show debugging
Command
Modes
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show debug
Generic IP: (Access List: test)
IP packet debugging is on for (Access List: test)
TenGigabitEthernet 0/16
ICMP packet debugging is on for
TenGigabitEthernet 0/16
OSPF:1
OSPF packet debugging is on
DHCP:
DHCP debugging is on
Dell#
show diag
Display the diagnostics information.
Syntax
show diag {information | stack-unit number [detail | summary]]
| testcase}
Parameters
information Enter the keyword information to view current diagnostics
information in the system.
Control and Monitoring
63