Command Line Reference Guide

Lines Beginning

With

Description

Dell Force10

Application...

Software version

Build Time... Software build’s date stamp

Build Path... Location of the software build files loaded on the system

Dell Force10

uptime is...

Amount of time the system has been up

System image... Image file name

Chassis Type: System type (M I/O Aggregator)

Control

Processor:...

Control processor information and amount of memory on

processor

256M bytes... Amount of boot flash memory on the system

1 34 Port Hardware configuration of the system, including the

number and type of physical interfaces available

upgrade boot

Upgrade the bootflash image or bootselector image.

Syntax

upgrade boot {all | bootflash-image | bootselector-image}

stack-unit {0-5 | all} {booted | flash: |ftp: | tftp: |

usbflash:} (A: | B:}

Parameters

all Enter the keyword all to change both the bootflash and

bootselecter images.

bootflash-

image

Enter the keywords bootflash-image to change the

bootflash image.

bootselector-

image

Enter the keywords bootselector-image to change the

bootselector image.

0–5 Enter the keyword 0–5 to upgrade only the mentioned

stack-unit.

all Enter the keyword all to upgrade all the member stack-

units.

booted Enter the keyword booted to upgradefrom the current

image in the M I/O Aggregator.

ftp: After entering the keyword ftp:, you can either follow it

with the location of the source file in this form: //

File Management