Command Line Reference Guide

Example
Dell(conf)#int tengigabitethernet 0/2
Dell(conf-if-te-0/2)#00:18:21: %STKUNIT0-M:CP %DIFFSERV-4-
DSM_DCBX_MANUAL_INCOMPATIBLE_CONFIG: Incompatible PFC config
received on MANUAL interface Te 0/7 - repeated 59 times
Dell(conf-if-te-0/2)#
Dell(conf-if-te-0/2)#
Dell(conf-if-te-0/2)#vlan tagged 10
Dell(conf-if-te-0/2)#vlan untagged 20
Dell(conf-if-te-0/2)#do show interfaces switchport
tengigabitethernet 0/2
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT
untagged, V - VLT tagged
Name: TenGigabitEthernet 0/2
802.1QTagged: Hybrid
IO-AGG port mode: Admin VLANs enabled
Vlan membership:
Q Vlans
U 20
T 10
Native VlanId: 20.
Dell(conf-if-te-0/2)#
Example
(tagged hybrid)
Dell(conf)#interface tengig 0/20
Dell(conf-if-te-0/20)#no shut
Dell(conf-if-te-0/20)#portmode hybrid
Dell(conf-if-te-0/20#sw
Dell(conf-if-te-0/20)#int vlan 10
Dell(conf-if-vl-10)#int tengig 0/20
Dell(conf-if-vl-20)# untag tengig 0/20
Dell (conf-if-vl-20)#
Dell(conf)#do show interfaces switchport tengigabitethernet
3/20
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT
untagged,
V - VLT tagged
Name: TenGigabitEthernet 3/20
802.1QTagged: Hybrid
Vlan membership:
Q Vlans
U 20
T 10
Native VlanId: 20.
Dell(conf)#
PMUX Mode of the I/O Aggregator
391