Command Line Reference Guide

File Management

This chapter contains commands needed to manage the configuration files and includes other file

management commands.

The commands in this chapter are supported by the Dell Networking OS.

boot system gateway

Specify the IP address of the default next-hop gateway for the management subnet.

Syntax

boot system gateway ip-address

Parameters

ip-address Enter an IP address in dotted decimal format.

Command

Modes

CONFIGURATION

Command

History

Version 9.4(0.0) Supported on the FN I/O aggregator.

Usage

Information

Saving the address to the startup configuration file preserves the address in NVRAM

in case the startup configuration file is deleted.

boot system stack-unit

Specify the location of the Dell Networking OS image to be used to boot the system.

Syntax

boot system stack-unit <0-5 | all> {default | primary |

secondary}

Parameters

0-5 Enter the stack member unit identifier of the stack member.

all Enter the keyword all to set the primary, secondary, and

default images for the system.

default Enter the keyword default to set the default image path for

the system.

primary Enter the keyword primary to set the primary image path

for the system.

File Management