Command Line Reference Guide

Example
Dell#show system stack-unit 0 fanout ?
configured Configured fan out ports
Dell#show system stack-unit 0 fanout configured ?
| Pipe through a command
<cr>
Dell#show system stack-unit 0 fanout configured
Configured fan out ports in stack-unit 0
Configured Next Boot
33 33
37 37
41 41
45 45
Dell#
show system stack-unit iom-mode
Displays the current iom-mode (stack/standalone) and the mode configured after next reboot.
Syntax
show system stack-unit unit-number iom-mode
Parameters
unit number
<0–5>
Enter the number of the member stack unit. The range is
from 0 to 5.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show system stack-unit all iom-mode ?
| Pipe through a command
<cr>
Dell#show system stack-unit all iom-mode
Unit Boot-Mode Next-Boot
------------------------------------------------
0 stack stack
1 stack stack
2 stack stack
3 stack stack
4 Not Present
5 Not Present
Dell#
show system stack-unit iom-uplink-speed
Display the uplink speed of the LAG bundles configured on the Flex IO modules installed on the
Aggregator.
Syntax
show system stack-unit unit-number iom-uplink-speed
264
Stacking Commands