Command Line Reference Guide

0/37 1/37 40 up up
1/33 40 up down
1/37 0/37 40 up up
Dell#
Example
(Status)
Dell# show system stack-ports status
Topology: Daisy chain
Interface Link Speed Admin Link Trunk
(Gb/s) Status Status Group
0/33 40 up down
0/37 40 up up
1/33 40 up down
1/37 40 up up
Example
(Topology)
Dell# show system stack-ports topology
Topology: Daisy chain
Interface Connection Trunk
Group
0/33
0/37 1/37
1/33
1/37 0/37
Dell #
Related
Commands
power-cycle stack-unit—resets the designated stack member.
show diag— displays the data plane or management plane input and output
statistics of the designated component of the designated stack member.
show system—displays the current status of all stack members or a specific
member.
show system stack-unit fanout
Displays the current 40GbE ports configured in fanout mode.
Syntax
show system stack-unit <unit-number> fanout[configured]
Parameters
unit-number
<0–5>
Enter the number of the member stack unit. The range is
from 0 to 5.
Defaults none
Command
Modes
• EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Stacking Commands
263