Command Line Reference Guide

the timeout, retransmit, or key values, include those keywords when using the
no radius-server host command syntax.
Related
Commands
login authentication — sets the database to be checked when a user logs in.
radius-server retransmit — sets the number of times the RADIUS server attempts to
send information.
radius-server timeout — sets the time interval before the RADIUS server times out.
radius-server retransmit
Configure the number of times the switch attempts to connect with the configured RADIUS host server
before declaring the RADIUS host server unreachable.
Syntax
radius-server retransmit retries
To configure zero retransmit attempts, use the no radius-server retransmit
command.
To return to the default setting, use the radius-server retransmit 3
command.
Parameters
retries Enter a number of attempts that Dell Networking Operating
System (OS) tries to locate a RADIUS server. The range is
from zero (0) to 100. The default is 3 retries.
Defaults 3 retries
Command
Modes
CONFIGURATION
Command
History
Version 9.3(0.0) Introduced on the M I/O Aggregator.
Related
Commands
radius-server host — configures a RADIUS host.
radius-server timeout
To reply to a request, configure the amount of time the RADIUS client (the switch) waits for a RADIUS
host server .
Syntax
radius-server timeout seconds
To return to the default value, use the no radius-server timeout command.
Security for M I/O Aggregator
237