Command Line Reference Guide

Command
History
Version 9.3(0.0) Introduced on the M I/O Aggregator.
Usage
Information
If you configure the aaa authentication login default command, the
login authentication default command automatically is applied to all
terminal lines.
Related
Commands
aaa authentication login — selects the login authentication methods.
RADIUS Commands
The following RADIUS commands are supported by Dell Networking Operating System (OS).
radius-server deadtime
Configure a time interval during which non-responsive RADIUS servers to authentication requests are
skipped.
Syntax
radius-server deadtime seconds
To disable this function or return to the default value, use the no radius-server
deadtime
command.
Parameters
seconds Enter a number of seconds during which non-responsive
RADIUS servers are skipped. The range is from 0 to
2147483647 seconds. The default is 0 seconds.
Defaults 0 seconds
Command
Modes
CONFIGURATION
Command
History
Version 9.3.
(0.0)
Introduced on the M I/O Aggregator.
radius-server host
Configure a RADIUS server host.
Syntax
radius-server host {hostname | ipv4-address | ipv6-address}
[auth-port port-number] [retransmit retries] [timeout seconds]
[key [encryption-type] key]
Security for M I/O Aggregator
235