Command Line Reference Guide

Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
show ip igmp groups
View the IGMP groups.
Syntax
show ip igmp groups [group-address [detail] | detail |
interface [group-address [detail]]]
Parameters
group-address (OPTIONAL) Enter the group address in dotted decimal
format to view information on that group only.
interface (OPTIONAL) Enter the interface type and slot/port
information:
For a VLAN interface enter the keyword vlan followed by a
number from 1 to 4094.
detail (OPTIONAL) Enter the keyword detail to display the IGMPv3
source information.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show ip igmp groups
Total Number of Groups: 5
IGMP Connected Group Membership
Group Address Interface Mode Uptime
Expires Last Reporter
225.0.0.0 Vlan 100 IGMPv2 00:00:05
00:02:04 3.0.0.51
Member Ports: Po 2
225.0.0.2 Vlan 100 IGMPv2 00:00:05
00:02:04 3.0.0.51
Member Ports: Po 2
225.0.0.3 Vlan 100 IGMPv2 00:00:05
00:02:04 3.0.0.51
Member Ports: Po 2
225.0.0.4 Vlan 100 IGMPv2 00:00:05
00:02:04 3.0.0.51
Member Ports: Po 2
Field Description
Group Address Lists the multicast address for the IGMP
group.
Interface Lists the interface type, slot and port
number.
Internet Group Management Protocol (IGMP)
141