Command Line Reference Guide

ifm Enable for IFM specific debugs
info Enable for Information specific debugs
ipc Enable for IPC specific debugs
rx Enable for packet receive specific debugs
Command
Modes
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
show fip-snooping config
Displays the FIP snooping status and configured FC-MAP values.
Syntax
show fip-snooping config
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show fip-snooping config
FIP Snooping Feature enabled Status: Enabled
FIP Snooping Global enabled Status: Enabled
Global FC-MAP Value: 0X0EFC00
Dell#
show fip-snooping enode
Displays information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC
address, FCF MAC address, VLAN ID, and FC-ID.
Syntax
show fip-snooping enode [enode-mac-address]
Parameters
enode-mac-
address
Enter the MAC address of the ENodes to be displayed.
Command
Modes
• EXEC
• EXEC Privilege
FIP Snooping
131