Command Line Reference Guide

pkts, 0 Error
Appln Priority TLV pkts
Total DCBx Frames transmitted 0
Total DCBx Frames received 0
Total DCBx Frames errors 0
Total DCBx Frames unrecognized 0
Dell#
show interface ets
Displays the ETS configuration applied to egress traffic on an interface, including priority groups with
priorities and bandwidth allocation.
Syntax
show interface port-type slot/port ets {summary | detail}
Parameters
port-type slot/
port ets
Enter the port-type slot and port ETS information.
{summary |
detail}
Enter the keyword summary for a summary list of results or
enter the keyword
detail for a full list of results.
Command
Modes
EXEC Privilege
Command
History
Version 8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
To clear ETS TLV counters, use the clear ets counters interface port-
type slot/port command.
The following describes the show interface summary command shown in the
following example.
Field Description
Interface Interface type with stack-unit and port number.
Max Supported
TC Group
Maximum number of priority groups supported.
Number of Traffic
Classes
Number of 802.1p priorities currently configured.
Admin mode ETS mode: on or off. When on, the scheduling and
bandwidth allocation configured in an ETS output policy or
received in a DCBX TLV from a peer can take effect on an
interface.
Admin Parameters ETS configuration on local port, including priority groups,
assigned dot1p priorities, and bandwidth allocation.
112
Data Center Bridging (DCB)