Administrator Guide

terminal monitor
Configure the Dell Networking OS to display messages on the monitor/terminal.
Syntax
terminal monitor
To return to default settings, use the no terminal monitor command.
Defaults Disabled
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
terminal xml
Enable XML mode in Telnet and SSH client sessions.
Syntax
terminal xml
To exit the XML mode, use the no terminal monitor command.
Defaults Disabled
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
This command enables XML input mode where you can either cut and paste XML requests or enter the
XML requests line-by-line.
trace route
View the packet path to a specific device.
Syntax
traceroute {host | ip-address}
Parameters
host
Enter the name of device.
ip-address Enter the IP address of the device in dotted decimal format.
Defaults Timeout = 5 seconds; Probe count = 3; 30 hops max; 40 byte packet size; UDP port = 33434
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
72 Control and Monitoring