Administrator Guide

show diag
Display the diagnostics information.
Syntax
show diag {information | stack-unit number [detail | summary]] | testcase}
Parameters
information Enter the keyword information to view current diagnostics information in the
system.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit then the unit-id to display
information on a specific stack member. The range is from 0 to 5.
detail (OPTIONAL) Enter the keyword detail to view detailed diagnostics information.
summary (OPTIONAL) Enter the keyword summary to view a summary of the diagnostics
information.
testcase Enter the keyword testcase to view current diagnostics testcases available in
the system.
Defaults Summary
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
show environment
Displays the system component status (for example, temperature or voltage).
Syntax
show environment [all | stack-unit unit-id]
Parameters
all Enter the keyword all to view all components.
stack-unit unit-id Enter the keywords stack-unit then the unit-id to display information on a specific stack
member. The range is from 0 to 5.
thermal sensor Enter the keywords thermal-sensor to view all components.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example (all)
Dell#show environment all
-- Unit Environment Status --
Unit Status Temp Voltage TempStatus
---------------------------------------------------------------------------
* 1 online 66C ok 2
* Management Unit
-- Thermal Sensor Readings (deg C) --
Unit Sensor0 Sensor1 Sensor2 Sensor3 Sensor4 Sensor5 Sensor6 Sensor7
Control and Monitoring 55