Administrator Guide

Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
Users entering EXEC Privilege mode or any other configured privilege level can access configuration
commands. To protect against unauthorized access, use the enable password command to configure
a password for the enable command at a specific privilege level. If no privilege level is specified, the
default is privilege level 15.
Related
Commands
enable password— configures a password for the enable command and to access a privilege level.
end
Return to EXEC Privilege mode from other command modes (for example, CONFIGURATION mode).
Syntax
end
Command Modes
● CONFIGURATION
● LINE
● INTERFACE
● MONITOR SESSION
● PROTOCOL LLDP
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
exit— returns to the lower command mode.
exit
Return to the lower command mode.
Syntax
exit
Command Modes
● EXEC Privilege
● CONFIGURATION
● LINE
● INTERFACE
● PROTOCOL LLDP
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
end — returns to EXEC Privilege mode.
Control and Monitoring 45