Administrator Guide

Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
show command-history— displays a buffered log of all the commands all users enter along with a time
stamp.
configure
Enter CONFIGURATION mode from EXEC Privilege mode.
Syntax
configure [terminal]
Parameters
terminal (OPTIONAL) Enter the keyword terminal to specify that you are configuring
from the terminal.
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#configure
Dell(conf)#
debug cpu-traffic-stats
Enable the collection of computer processor unit (CPU) traffic statistics.
Syntax
debug cpu-traffic-stats
Defaults Disabled
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
This command enables (and disables) the collection of CPU traffic statistics from the time this command
is executed (not from system boot). However, excessive traffic a CPU receives automatically triggers
(turn on) the collection of CPU traffic statics.
To view the traffic statistics, use the show cpu-traffic-stats command.
If the CPU receives excessive traffic, traffic is rate controlled.
NOTE: You must enable this command before the show cpu-traffic-stats command displays
traffic statistics. Dell Networking recommends disabling debugging (no debug cpu-traffic-
stats) after troubleshooting is complete.
Related
Commands
show cpu-traffic-stats— displays the cpu traffic statistics.
Control and Monitoring 43