Administrator Guide

• undebug all
• write
asset-tag
Assign and store a unique asset-tag to the stack member.
Syntax
asset-tag stack-unit unit id Asset-tag ID
To remove the asset tag, use the no stack-unit unit-id Asset-tag ID command.
Parameters
stack-unit unit-id Enter the keywords stack-unit then the unit-id to assign a tag to the
specific member. The range is from 0 to 5.
Asset-tag ID Enter a unique asset-tag ID to assign to the stack member. This option accepts a
maximum of 10 characters, including all special characters except double quotes. To
include a space in the asset-tag, enter a space within double quotes.
Defaults No asset-tag is assigned.
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
Related
Commands
show system— Displays the current status of all stack members or a specific member.
clear alarms
Clear the alarms on the system.
Syntax
clear alarms
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
This command clears alarms that are no longer active. If an alarm situation is still active, it is seen in the
system output.
clear command history
Clear the command history log.
Syntax
clear command history
Command Modes EXEC Privilege
Supported Modes All Modes
42 Control and Monitoring