Administrator Guide

Example
Dell#show version
Dell Force10 Real Time Operating System Software
Dell Force10 Operating System Version: 1.0
Dell Force10 Application Software Version: E8-3-17-38
Copyright (c) 1999-2012 by Dell Inc. All Rights Reserved.
Build Time: Thu Jul 19 05:59:59 PDT 2012
Build Path: /sites/sjc/work/swsystems01-2/ravisubramani/ravis-8317/SW/
SRC/
Cp_src/Tacacs
FTOS uptime is 4 day(s), 4 hour(s), 3 minute(s)
System image file is "dv-m1000e-2-b2" System Type: I/O-Aggregator
Control Processor: MIPS RMI XLP with 2147483648 bytes of memory.
256M bytes of boot flash memory.
1 34-port GE/TE (XL)
56 Ten GigabitEthernet/IEEE 802.3 interface(s)
Command Fields
Lines
Beginning
With
Description
Dell Force10
Network...
Name of the operating system
Dell Force10
Operating...
OS version number
Dell Force10
Application...
Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell Force10
uptime is...
Amount of time the system has been up
System image... Image file name
Chassis Type: System type (M I/O Aggregator)
Control
Processor:...
Control processor information and amount of memory on processor
256M bytes... Amount of boot flash memory on the system
1 34 Port Hardware configuration of the system, including the number and type of physical
interfaces available
upgrade boot
Upgrade the bootflash image or bootselector image.
Syntax
upgrade boot {all | bootflash-image | bootselector-image} stack-unit {0-5 |
all} {booted | flash: |ftp: | tftp: | usbflash:} (A: | B:}
Parameters
all Enter the keyword all to change both the bootflash and bootselecter images.
bootflash-image Enter the keywords bootflash-image to change the bootflash image.
bootselector-
image
Enter the keywords bootselector-image to change the bootselector image.
0–5 Enter the keyword 0–5 to upgrade only the mentioned stack-unit.
38 File Management