Administrator Guide

ManualsBrandsDell ManualsComputer equipmentPowerEdge M IO Aggregator

logging

for the current logging configuration

management-

route

for the current Management port forwarding configuration

monitor

for the current Monitor configuration

snmp

for the current SNMP configuration

uplink-state-

group

for the uplink state group configuration

users

for the current users configuration

configured (OPTIONAL) Enter the keyword configured to display line card interfaces with

non-default configurations only.

status (OPTIONAL) Enter the keyword status to display the checksum for the running

configuration and the start-up configuration.

Command Modes EXEC Privilege

Supported Modes All Modes

Command

History

Version Description

9.4(0.0) Supported on the FN I/O aggregator.

8.3.17.0 Supported on the M I/O Aggregator.

Example

Dell#show running-config

Current Configuration ...

! Version 9-4(0-180)

boot system stack-unit 0 primary tftp://10.11.8.12/dv-ci-stomp-tc-1-a1

redundancy auto-synchronize full

hostname Dell

...

Example

Dell#show running-config status

running-config bytes 5063, checksum 0xF6F801AC

startup-config bytes 4835, checksum 0x764D3787

Dell#

Usage

Information

The status option allows you to display the size and checksum of the running configuration and the

startup configuration.

show version

Displays the current Dell Networking OS version information on the system.

Syntax