Administrator Guide

Parameters
file-url (OPTIONAL) Enter the following location keywords and information:
● For a file on the internal Flash, enter flash:// then the filename.
● For a file on an FTP server, enter ftp://user:password@hostip/
filepath.
● For a file on a TFTP server, enter tftp://hostip/filepath.
● For a file on the external Flash, enter usbflash://filepath then the
filename.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
NOTE: A filepath that contains a dot ( . ) is not supported.
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
--------------------------------------------------------------
Platform Version Size ReleaseTime
IOM-Series: XL 8-3-17-38 31603078 Jul 19 2012 06:02:28
TARGET IMAGE INFORMATION :
--------------------------------------------------------------
Type Version Target checksum
runtime 8-3-17-38 Control Processor passed
CPLD IMAGE INFORMATION :
--------------------------------------------------------------
Card CPLD Name Version
Stack-unit 1 IOM SYSTEM CPLD 6
Dell#
show running-config
Displays the current configuration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) configuration, enter one
of the following keywords:
NOTE: If you did not configure anything for that entity, nothing displays and
the prompt returns.
boot
for the current boot configuration
ftp
for the current FTP configuration
igmp
for the current IGMP configuration
interface
for the current interface configuration
line
for the current line configuration
lldp
for the current lldp configuration
36 File Management