Administrator Guide

show boot system
Displays information about boot images currently configured on the system.
Syntax
show boot system stack-unit {0-5 | all}
Parameters
0–5 Enter this information to display the boot image information of only the entered
stack-unit.
all Enter the keyword all to display the boot image information of all the stack-units
in the stack.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show boot system stack-unit all
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------
Stack-unit 0 is not present.
Stack-unit 1 DOWNLOAD BOOT 9-1-0-218 9-1-0-202
Stack-unit 2 is not present.
Stack-unit 3 is not present.
Stack-unit 4 is not present.
Stack-unit 5 is not present.
show file
Displays contents of a text file in the local filesystem.
Syntax
show file url
Parameters
url Enter one of the following:
● For a file on the internal Flash, enter flash:// then the filename.
● For a file on the external Flash, enter usbflash:// then the filename.
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show file flash://startup-config
! Version E8-3-17-38
boot system stack-unit 1 primary tftp://10.11.9.21/dv-m1000e-2-b2
boot system stack-unit 1 default system: A:
boot system gateway 10.11.209.62
34 File Management