Administrator Guide

Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#pwd
flash:
Dell#
Related
Commands
cd – changes the directory.
rename
Rename a file in the local file system.
Syntax
rename url url
Parameters
url Enter the following keywords and a filename:
● For a file on the internal Flash, enter flash:// then the filename.
● For a file on an external USB drive, enter usbflash:// then the filename.
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
restore factory-defaults
Restore factory defaults.
Syntax
restore factory-defaults stack-unit id {clear-all | nvram}
Parameters
factory-defaults Return the system to its factory default mode.
id Enter the stack member unit identifier to restore the mentioned stack-unit. The
range is from 0 to 6. Enter the keyword all to restore all units in the stack.
clear-all Enter the keywords clear-all to reset the NvRAM and the system startup
configuration.
nvram Enter the keyword nvram to reset the NvRAM only.
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
Restoring factory defaults deletes the existing startup configuration and all persistent settings (stacking,
fanout, and so forth).
32 File Management