Administrator Guide

Defaults Not configured.
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
clock summer-time date — sets a date (and time zone) on which to convert the switch to daylight saving
time on a one-time basis.
show clock — displays the current clock settings.
clock timezone
Configure a timezone for the switch.
Syntax
clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-name Enter the name of the timezone. You cannot use spaces.
offset Enter one of the following:
● a number from 1 to 23 as the number of hours in addition to universal time
coordinated (UTC) for the timezone.
● a minus sign (-) then a number from 1 to 23 as the number of hours.
Defaults Not configured.
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
Coordinated universal time (UTC) is the time standard based on the International Atomic Time standard,
commonly known as Greenwich Mean time. When determining system time, include the differentiator
between UTC and your local timezone. For example, San Jose, CA is the Pacific Timezone with a UTC
offset of -8.
clock update-calendar
Set the switch hardware clock based on the software clock.
Syntax
clock update-calendar
Defaults Not configured.
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
System Time 295