Administrator Guide

boot system stack-unit

Specify the location of the Dell Networking OS image to be used to boot the system.

Syntax

boot system stack-unit <0-5 | all> {default | primary | secondary}

Parameters

0-5 Enter the stack member unit identifier of the stack member.

all Enter the keyword all to set the primary, secondary, and default images for the

system.

default Enter the keyword default to set the default image path for the system.

primary Enter the keyword primary to set the primary image path for the system.

secondary Enter the keyword secondary to set the secondary image path for the system.

Command Modes CONFIGURATION

Supported Modes All Modes

Command

History

Version Description

8.3.17.0 Supported on the M I/O Aggregator.

9.4(0.0) Supported on the FN I/O aggregator.

Usage

Information

The system first attempts to load the image from the primary path. If it fails to boot, the system tries to

load the image from the secondary path and if that also fails, the system loads the default image.

Change to a different working directory.

Syntax

cd directory

Parameters