Administrator Guide

ManualsBrandsDell ManualsComputer equipmentPowerEdge M IO Aggregator

261

262

263

264

265

266

267

268

269

270

Usage

Information

After entering the banner login command, type one or more spaces and a delineator character. Enter the

banner text then the second delineator character. When the user is connected to the router, if a message

of the day banner is configured, it displays first. If no message of the day banner is configured, the login

banner and prompt appear. After the user has logged in, the EXEC banner (if configured) displays.

Example

Dell(conf)#banner login ?

keyboard-interactive Press enter key to get prompt

LINE c banner-text c, where 'c' is a delimiting character

Dell(conf)#no banner login ?

keyboard-interactive Prompt will be displayed by default

<cr>

Dell(conf)#banner login keyboard-interactive

Enter TEXT message. End with the character '%'.

This is the banner%

Dell(conf)#end

Dell#exit

13d21h9m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated for user

on line console

This is the banner

Dell con0 now available

Press RETURN to get started.

13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for user on

line console

This is the banner

Dell>

Commands

exec-banner— enables the display of a text string when you enter EXEC mode.

banner motd

Set a message of the day (MOTD) banner.

Syntax

banner motd c line c

Parameters

Enter a delineator character to specify the limits of the text banner. The delineator

is a percent character (%).

line

Enter a text string for your MOTD banner the message with your delineator. The

delineator is a percent character (%).

Defaults No banner is configured.

Command Modes CONFIGURATION

Supported Modes All Modes

Command

History

Version Description

9.4(0.0) Supported on the FN I/O Aggregator.

9.3(0.0) Supported on the M I/O Aggregator.