Administrator Guide

aaa authorization commands
Set parameters that restrict (or permit) a user’s access to EXEC and CONFIGURATION level commands.
Syntax
aaa authorization commands {level | role role-name}{name|default} {local |
tacacs+| none}
Undo a configuration with the no aaa authorization commands {level | role role-
name} {name|default} {local | tacacs+ | none} command.
Parameters
commands level Enter the keyword commands then the command privilege level for command level
authorization.
role role-name Enter the keyword role then the role name.
name Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.6(0.0) Supported on the M I/O Aggregator
aaa authorization config-commands
Set parameters that restrict (or permit) a user’s access to EXEC level commands.
Syntax
aaa authorization config-commands
Disable authorization checking for CONFIGURATION level commands using the no aaa
authorization config-commands command.
Defaults Enabled when you configure aaa authorization commands command.
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following table lists the Dell Networking OS version history for this command.
Version Description
9.6.(0.0) Supported on the FN I/O Aggregator and M I/O Aggregator.
Usage
Information
By default, the aaa authorization commands command configures the system to check both EXEC
level and CONFIGURATION level commands. Use the command no aaa authorization config-
commands to enable only EXEC-level command checking.
Security 257