Administrator Guide

Usage
Information
A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
Related
Commands
policy-map-output — creates an output policy map.
service-queue
Assign a class map and QoS policy to different queues.
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-
name]
To remove the queue assignment, use the no service-queue queue-id [class-map class-
map-name] [qos-policy qos-policy-name] command.
Parameters
queue-id Enter the value used to identify a queue. The range is from 0 to 3 (four queues per
interface; four queues are reserved for control traffic).
class-map class-
map-name
(OPTIONAL) Enter the keyword class-map then the class map name assigned to
the queue in character format (32 character maximum).
NOTE: This option is available under policy-map-input only.
qos-policy qos-
policy-name
(OPTIONAL) Enter the keywords qos-policy then the QoS policy name assigned
to the queue in text format (32 characters maximum). This specifies the input QoS
policy assigned to the queue under policy-map-input and output QoS policy
under policy-map-output context.
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Supported Modes Programmable-Mux (PMUX)
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This command assigns a class map or QoS policy to different queues.
Related
Commands
service-policy output — applies an output policy map to the selected interface.
show qos dcb-map
Display the DCB parameters configured in a specified DCB map.
Syntax
show qos dcb-map map-name
Parameters
map-name Displays the PFC and ETS parameters configured in the specified map.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
252 Quality of Service (QoS)