Administrator Guide

Command
History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-mon-sess-1)#show config
!
monitor session 1
source TenGigabitEthernet 0/1 destination Port-channel 1 direction rx
show monitor session
Display the monitor information of a particular session or all sessions.
Syntax
show monitor session {session-ID}
To display monitoring information for all sessions, use the show monitor session command.
Parameters
session-ID (OPTIONAL) Enter a session identification number. The range is from 0 to 65535.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show monitor session
SessID Source Destination Dir Mode Source IP
Dest IP
------ ------ ----------- --- ---- ---------
--------
1 Vl 10 Te 0/8 rx Flow N/
A N/A
Related
Commands
monitor session— creates a session for monitoring.
show running-config monitor session
Displays the running configuration of all monitor sessions or a specific session.
Syntax
show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use the show running-config
monitor session command.
Parameters
session-ID (OPTIONAL) Enter a session identification number. The range is from 0 to 65535.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Port Monitoring 243