Administrator Guide

show lldp neighbors
Display LLDP neighbor information for all interfaces or a specified interface.
Syntax
show lldp neighbors [interface] [detail]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
● For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet then the slot/port information.
detail (OPTIONAL) Enter the keyword detail to display all the TLV information, timers,
and LLDP tx and rx counters.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
Omitting the keyword detail displays only the remote chassis ID, Port ID, and Dead Interval.
Example
Dell (conf-if-te-1/31)#do show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
-------------------------------------------------------------------------
Te 1/37 FTOS TenGigabitEthernet 0/37 00:01:e8:05:40:46
Te 1/38 FTOS TenGigabitEthernet 0/38 00:01:e8:05:40:46
Te 1/39 FTOS TenGigabitEthernet 0/39 00:01:e8:05:40:46
Te 1/40 FTOS TenGigabitEthernet 0/40 00:01:e8:05:40:46
Dell (conf-if-te-1/31)#
show lldp statistics
Displays the LLDP statistical information.
Syntax
show lldp statistics
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell#show lldp statistics
--------- LLDP GLOBAL STATISTICS ON CHASSIS ------------
Total number of neighbors: 4
Last table change time: 00:01:17, In ticks: 3859
Total number of Table Inserts: 7
Total number of Table Deletes: 3
Total number of Table Drops: 0
Total number of Table Age Outs: 0
Dell#
240 Link Layer Discovery Protocol (LLDP)