Administrator Guide

Column
Heading
Description
Type Lists whether the MAC address was manually configured (Static), learned
(Dynamic), or associated with a specific port (Sticky). An (N) indicates that the
specified MAC address has been learnt by a neighbor and is synced to the node.
Interface Displays the interface type and slot/port information. The following abbreviations
describe the interface types:
● gi — Gigabit Ethernet then a slot/port
● po — Port Channel then a number. The range is from 1 to 255. \
● so — SONET then a slot/port.
● te — 10–Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
The following describes the show mac-address-table count command shown in the following
example.
Line
Beginning
With
Description
MAC Entries... Displays the number of MAC entries learned per VLAN.
Dynamic
Address...
Lists the number of dynamically learned MAC addresses.
Static Address... Lists the number of user-defined MAC addresses.
Total MAC... Lists the total number of MAC addresses the switch uses.
Example (Count)
Dell#show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 5
Static Address (User-defined) Count : 0
Total MAC Addresses in Use: 5
Dell#
234 Layer 2