Administrator Guide

Example
(Counter)
Dell#show lacp 1 counters
----------------------------------------------------
LACP PDU Marker PDU Unknown Illegal
Port Xmit Recv Xmit Recv Pkts Rx Pkts Rx
-----------------------------------------------------
TenGig 0/1 200 200 0 0 0 0
Dell#
Related
Commands
clear lacp counters — Clears the LACP counters.
show interfaces port-channel — Displays the information on configured Port Channel groups.
show link-bundle-distribution port-channel
Display the traffic-handling and utilization of the member interfaces of the port channel.
Syntax
show link-bundle-distribution port-channel
Command Modes EXEC
EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.3.0.0 Introduced on the M I/O Aggregator
Usage
Information
The following table describes the output fields of this show command:
Field Description
Link-bundle trigger threshold Threshold value that is the checkpoint, exceeding
which the link bundle is marked as being
overutilized and alarm is generated
LAG bundle number Number of the LAG bundle
Utilization (In Percent) Traffic usage in percentage of the packets
processed by the port channel
Alarm State Indicates whether an alarm is generated if
overutilization of the port channel occurred.
Possible values are Active and Inactive
Interface Slot and port number, and the type of the
member interface of the port channel
Line Protocol Indicates whether the interface is
administratively up or down
Utilization (In Percent) Traffic usage in percentage of the packets
processed by the particular member interface
Example
Dell#show link-bundle-distribution port-channel
Link-bundle trigger threshold - 60
LAG bundle - 1 Utilization[In Percent] - 0 Alarm State -
Inactive
Interface Line Protocol Utilization[In Percent]
Te 0/5 Up 0
Te 0/13 Up 0
Link Aggregation Control Protocol (LACP) 227