Administrator Guide

Command Modes EXEC
EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
show lacp — displays the LACP configuration.
debug lacp
Debug LACP (events).
Syntax
debug lacp [events | pdu interface [in | out]]
To disable LACP debugging, use the no debug lacp [events | pdu interface [in | out]]
command.
Parameters
events (OPTIONAL) Enter the keyword events to debug the LACP event information.
pdu in | out (OPTIONAL) Enter the keyword pdu to debug the LACP Protocol Data Unit
information. Optionally, enter an inor out parameter to:
● Receive enterin
● Transmit enterout
interface in | out Enter the following keywords and slot/port or number information:
● For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
Defaults none
Command Modes
EXEC
EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
io-aggregator auto-lag enable
Enable auto-lag globally on the server facing ports
Syntax
io-aggregator auto-lag enable
To disable the auto-lag, use the no io-aggregator auto-lag enable command.
When disabled, all the server ports associated in a LAG are removed and the LAG itself gets removed. Any
LACPDUs received on the server ports are discarded.
Defaults Enabled
Command Modes CONFIGURATION
220 Link Aggregation Control Protocol (LACP)