Administrator Guide

Number of Multicast Discovery Solicits :0
Number of Unicast Discovery Solicits :0
Number of FLOGI :0
Number of FDISC :0
Number of FLOGO :0
Number of Enode Keep Alive :0
Number of VN Port Keep Alive :0
Number of Multicast Discovery Advertisement :4451
Number of Unicast Discovery Advertisement :2
Number of FLOGI Accepts :2
Number of FLOGI Rejects :0
Number of FDISC Accepts :16
Number of FDISC Rejects :0
Number of FLOGO Accepts :0
Number of FLOGO Rejects :0
Number of CVL :0
Number of FCF Discovery Timeouts :0
Number of VN Port Session Timeouts :0
Number of Session failures due to Hardware Config :0
debug fip-snooping
Enable the debug FIP protocol specific messages.
Syntax
debug fip-snooping [all|acl|error|ifm|info|ipc|rx]
Parameters
all Enable all the debug options.
acl Enable for ACL specific debugs
error Enable for Error specific debugs
ifm Enable for IFM specific debugs
info Enable for Information specific debugs
ipc Enable for IPC specific debugs
rx Enable for packet receive specific debugs
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
show fip-snooping config
Displays the FIP snooping status and configured FC-MAP values.
Syntax
show fip-snooping config
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
FIP Snooping 145