Administrator Guide

Fabric Name si
Fabric Id 1004
Vlan Id 1004
Vlan priority 3
FC-MAP 0efc04
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State DOWN
Members
Related
Commands
fcoe-map creates an FCoE map which contains the parameters used in the communication between
servers and a SAN fabric.
show npiv devices
Display the FCoE and FC devices currently logged into an M I/O Aggregator with the FC Flex IO module NPIV proxy gateway.
M I/O Aggregator with the FC Flex IO module
Syntax
show npiv devices [brief]
Parameters
brief Displays an overview of current server CNA-fabric connections over an M I/O Aggregator with the FC Flex
IO module NPIV proxy gateway.
Command Modes
EXEC
EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module.
Usage
Information
Use the show npiv devices command to display information on the server CNA, server-facing Ethernet and fabric-facing FC
ports, and the SAN fabric in each server-fabric connection over an M I/O Aggregator with the FC Flex IO module that operates as
an NPIV proxy gateway.
The following table describes the show npiv devices brief output shown in the example below.
Field Description
ENode-Intf M I/O Aggregator with the FC Flex IO module Ethernet interface (slot/port) to which a server CNA is
connected.
ENode-WWPN Worldwide port name (WWPN) of a server CNA port.
FCoE-Vlan VLAN ID of the dedicated VLAN used to transmit FCoE traffic to and from the fabric.
Fabric-Intf Fabric-facing Fibre Channel port (slot/port) on which FC traffic is transmitted to the specified fabric.
Fabric-Map Name of the FCoE map containing the FCoE/FC configuration parameters for the server CNA-fabric
connection.
LoginMethod Method used by the server CNA to log in to the fabric; for example:
FLOGI - ENode logged in using a fabric login (FLOGI).
FDISC - ENode logged in using a fabric discovery (FDISC).
Status Operational status of the link between a server CNA port and a SAN fabric: Logged In - Server has logged in
to the fabric and is able to transmit FCoE traffic.
128 FC Flex IO Modules