Addendum

Configuring the Commands Without a
Separate User Account for the PMUX
Mode of the I/O Aggregator
Starting with Dell Networking OS Release 9.3.0.0, you can configure and specify the commands that
were available in the programmable MUX mode of the I/O Aggregator until Release 9.2.0.0 without
having to configure a user profile to access the PMUX mode. As a result, you do not need to define
separate user accounts with permissions to access the PMUX mode on the switch. The user profile that
you defined to access and log in to the switch is sufficient to configure these commands.
This part contains chapters that describe the commands that were previously available in the PMUX mode
(until Release 9.2.0.0), which you can now configure without the need for an exclusive, separate user
account. This chapter describes the commands and configuration settings that you can employ from the
PMUX mode of the I/O Aggregator. Although these commands are indicated as having been introduced
in Release 9.2(0.0), you had to specify a separate user profile with permissions to access PMUX mode to
be able to use these commands until Release 9.2(0.0). Starting with Release 9.3(0.0), you can operate
these commands and attributes without the need for a separate user profile.
Configuring the Commands Without a Separate User Account for the PMUX Mode of the I/O Aggregator
277