Addendum

number Enter a weight for the queue on the shared buffer as a
number in the range of 1 to 11.
Default The default threshold weight on the shared buffer for each queue is 9. Therefore,
each queue can consume up to 66.67 percent of available shared buffer by default.
Command
Modes
INTERFACE mode
Command
History
Version 9.3.0.0 Introduced on the S6000 platform
Usage
Information
You can configure all the data queues. For S6000, you can configure queues 0-7.
The following table describes the mapping between the threshold weight of the
shared buffer on the queue and the percentage of available shared buffer that is
used by the queue for each of the corresponding threshold weights of the shared
buffer:
shared-threshold-weight on the queue % of available shared buffer that can
be consumed by the queue.
0 No dynamic sharing; shared buffer
= 0.
1 0.77%
2 1.54%
3 3.03%
4 5.88%
5 11.11%
6 20%
7 33.33%
8 50%
9 66.67%
10 80%
11 88.89%
Example
Dell(conf-if-te-0/8)#Service-class buffer shared-threshold-
weight queue5 4 queue7 6
196
Quality of Service (QoS)