Addendum

Z9000
Syntax
show hardware stack-unit stack-unit {buffer unit {0–5} [port
port-number]| cpu data-plane statistics | cpu i2c statistics |
cpu party-bus statistics | cpu sata-interface statistics |
drops [unit number [port port-number]] | hg-stats [unit number
[port port-number]] | ipmc-replication | stack-port port-number
| table-dump| unit unit-number {counters | details | port-stats
[detail] | register}}
Parameters
hg-stats [unit
unit-number
[port port-
number | no]]
Enter the keyword hg-stats to display high–Gigabit
Ethernet or backplane port buffer and queue statistics on the
selected stack member. Optionally, use the keyword unit
with a number to select port-pipe 0 to 5, and then use port
port-number to select a port on that port-pipe.
For Z9000, valid backplane ports for leaf NPU units (units 0–
3) range from 34-41 and for spine NPU units (units 4–5)
range from 1-16.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.3.0.0 Added support for the hg-stats option on the Z9000
platform.
Example (High-
Gigabit
Ethernet
Statistics)
FTOS# show hardware stack-unit 0 hg-stats unit 4 port 30
% Error : Port 30 is not a valid back-plane hiGig port
FTOS# show hardware stack-unit 0 hg-stats unit 4 port 1
Input Statistics:
3942277 packets, 4224329282 bytes
0 64-byte pkts, 75905 over 64-byte pkts, 807091 over 127-
byte pkts
300653 over 255-byte pkts, 245844 over 511-byte pkts,
2512784 over 1023-byte pkts
394612 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
1335309 packets, 187184751 bytes, 0 underruns
0 64-byte pkts, 665971 over 64-byte pkts, 586727 over 127-
byte pkts
82038 over 255-byte pkts, 58 over 511-byte pkts, 515 over
1023-byte pkts
408949 Multicasts, 0 Broadcasts, 926163 Unicasts
0 throttles, 0 discarded, 0 collisions, 0 wredDrops
Rate info (interval 30 seconds):
Input 00.08 Mbits/sec, 10 packets/sec, 0.00% of
line-rate
Output 00.00 Mbits/sec, 3 packets/sec, 0.00% of
line-rate
168
Link Aggregation Groups (LAGs)