Addendum

Field Description
port channel occurred. Possible values
are Active and Inactive
Interface Slot and port number, and the type of
the member interface of the port
channel
Utilization (In Percent) Traffic usage in percentage of the
packets processed by the particular
member interface
Example
FTOS#show hg-link-bundle-distribution 0 npuUnit 5 hg-port-
channel 0
hg-link-bundle trigger threshold - 60
Slot 0 npuUnit 5 hg-port-channel-0 Utilization [In Percent] -
0 Alarm State - Inactive
Interface Utilization [In Percent]
0/5:hg0 10
0/5:hg1 10
0/5:hg2 10
0/5:hg3 10
snmp-server enable traps (for High-Gigabit Port Channel)
Enable the generation of SNMP traps and notifications when the capability to examine the traffic
utilization and distribution of high-Gigabit port channel links or trunk groups is enabled. This command is
supported on the Z9000 platform.
Syntax
snmp-server enable traps [notification-type]
Parameters
notification
type
Enter the keyword hg-lbm to enable high-Gigabit Link
Bundle Monitoring traps
Command
Modes
CONFIGURATION mode
Command
History
Version 9.3.0.0 Introduced on the Z9000 platform.
show hardware stack-unit (for high-Gigabit Ethernet
ports)
Display the data plane or management plane input and output statistics of the high-Gigabit Ethernet or
backplane port of the designated stack unit or Z9000 unit.
NOTE: Only the parameters that are newly introduced with this command in Release 9.3(0.0) are
explained here. For a complete description of all of the options that are available with this
command, refer the relevant Command Reference Guide of the applicable platform of Release
9.2(0.0).
Link Aggregation Groups (LAGs)
167