Addendum
If you configured the maximum number of instances as 5 and attempt to view the
buffer statistics tracking details for the instance ID of 6, the aforementioned error is
shown.
Example
FTOS#show hardware stack-unit 0 buffer-stats-snapshot unit 0
resource port 5 queue all history summary
Stack-unit 0 unit 0 port 5 (interface te 0/4)
---------------------------------------------------------------
------------------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
Instance 1 Instance 2
Instance 3 Instance 4 Instance 5
10S 20S
30S 40S 50S
---------------------------------------------------------------
------------------------------------------------
UCAST 2 5 4
6 0 1
UCAST 3 2 0
1 5 0
UCAST 11 0 3
2 0 3
MCAST 4 0 0
0 0 3
If only 2 instances are available at the time the above show command is issued,
only 2 instances will be displayed in the summary output.
---------------------------------------------------------------
------------------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
Instance 1 Instance 2
10S 20S
---------------------------------------------------------------
------------------------------------------------
UCAST 2 5 4
1
UCAST 3 2 0
UCAST 11 0 3
MCAST 4 0 0
FTOS#show hardware stack-unit 0 buffer-stats-snapshot unit 0
resource port 5 prio-group all history summary
Stack-unit 0 unit 0 port 5 (interface te 0/4)
---------------------------------------------------------------
------------------------------------------------
PG# Instance 1 Instance 2 Instance 3
Instance 4 Instance 5
Shared Hdrm Shared Hdrm Shared Hdrm Shared Hdrm
Shared Hdrm [in CELLS]
---------------------------------------------------------------
------------------------------------------------
6 9 2 0 0 1
0 4 1 7
1
112
Data Center Bridging (DCB)