Manualshelf

Users Guide

ManualsBrandsDell ManualsComputer equipmentPowerEdge M IO Aggregator
311312313314315316317318319320
Fabric ID The ID number of the SAN fabric to which FC traffic is forwarded.
VLAN ID The dedicated VLAN used to transport FCoE storage traffic between servers and a fabric
over the NPG. The configured VLAN ID must be the same as the fabric ID.
VLAN priority FCoE traffic uses VLAN priority 3. This setting is not user-configurable.
FC-MAP FCoE MAC-address prefix value - The unique 24-bit MAC address prefix that identifies a
fabric.
FKA-ADV-period Time interval (in seconds) used to transmit FIP keepalive advertisements.
FCF Priority The priority used by a server to select an upstream FCoE forwarder.
Config-State Indicates whether the configured FCoE and FC parameters in the FCoE map are valid: Active
(all mandatory FCoE and FC parameters are correctly configured) or Incomplete (either the
FC-MAP value, fabric ID, or VLAN ID are not correctly configured).
Oper-State Operational status of the link to the fabric: up (link is up and transmitting FC traffic), down
(link is down and not transmitting FC traffic), link-wait (link is up and waiting for FLOGI to
complete on peer FC port), or removed (port has been shut down).
Members Aggregator with the FC ports, which are members of the dedicated FCoE VLAN that carries
storage traffic to the specified fabric.
show qos dcb-map Command Examples
Dell# show qos dcb-map dcbmap2
State :Complete
PfcMode:ON
--------------------
PG:0 TSA:ETS BW:50 PFC:OFF
Priorities:0 1 2 4 5 6 7
PG:1 TSA:ETS BW:50 PFC:ON
Priorities:3
Table 40. show qos dcb-map Field Descriptions
Field Description
State Complete: All mandatory DCB parameters are correctly configured. In progress: The DCB map
configuration is not complete. Some mandatory parameters are not configured.
PFC Mode PFC configuration in the DCB map: On (enabled) or Off.
PG Priority group configured in the DCB map.
TSA Transmission scheduling algorithm used in the DCB map: Enhanced Transmission Selection
(ETS).
BW Percentage of bandwidth allocated to the priority group.
PFC PFC setting for the priority group: On (enabled) or Off.
NPIV Proxy Gateway 319