Users Guide

Clearing LLDP Counters
You can clear LLDP statistics that are maintained on an Aggregator for LLDP counters for frames transmitted to and received from
neighboring devices on all or a specified physical interface.
To clear LLDP counters, enter the clear lldp counters command.
1 Clear counters for LLDP frames sent to and received from neighboring devices on all Aggregator interfaces or on a specified
interface.
interface specifies a 10GbE uplink port in the format: tenGigabitEthernet slot/port.
EXEC Privilege mode
clear lldp counters [interface]
Debugging LLDP
You can view the TLVs that your system is sending and receiving.
To view the TLVs, use the following commands.
• View a readable version of the TLVs.
debug lldp brief
• View a readable version of the TLVs plus a hexadecimal version of the entire LLDPDU.
debug lldp detail
Link Layer Discovery Protocol (LLDP)
165