Users Guide

Defaults none
Command Modes
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
write
Copy the current configuration to either the startup-configuration file or the terminal.
Syntax
write {memory | terminal}
Parameters
memory
Enter the keyword memory to copy the current running configuration to the startup
configuration file. This command is similar to the copy running-config startup-
config
command.
terminal Enter the keyword terminal to copy the current running configuration to the terminal.
This command is similar to the show running-configcommand.
Command Modes
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The write memory command saves the running-configuration to the file labeled startup-configuration. When
using a LOCAL CONFIG FILE other than the startup-config not named “startup-configuration”, the running-config
is not saved to that file; use the copy command to save any running-configuration changes to that local file.
Control and Monitoring 83