Users Guide

Temperature : 67C
Voltage : ok
Switch Power : GOOD
Product Name : I/O Aggregator
Mfg By : DELL
Mfg Date :
Serial Number : 00000000000000
Part Number : NVH81X01
Piece Part ID : 00-NVH81X-00000-000-0000
PPID Revision : 01
Service Tag : N/A
Expr Svc Code : N/A
Chassis Svce Tag: RTWB200
Fabric Id : C2
Asset tag : test
PSOC FW Rev : 0xb
ICT Test Date : 0-0-0
ICT Test Info : 0x0
Max Power Req : 31488
Fabric Type : 0x3
Fabric Maj Ver : 0x1
Fabric Min Ver : 0x0
SW Manageability: 0x4
HW Manageability: 0x1
Max Boot Time : 3 minutes
Link Tuning : unsupported
Auto Reboot : enabled
Burned In MAC : 00:01:e8:00:ab:03
No Of MACs : 3
Dell#
Related Commands
asset-tag —Assign and store unique asset-tag to the stack member.
show version — Displays the Dell version.
show processes memory —Displays the memory usage based on the running processes.
show system stack-ports — Displays information about the stack ports on all switches in the stack.
show diag — Displays the data plane and management plane input and output statistics of a particular stack
member.
show tech-support
Displays a collection of data from other show commands, necessary for Dell Networking technical support to perform troubleshooting on
Aggregators.
Syntax
show tech-support [stack-unit unit-id | page]
Parameters
stack-unit (OPTIONAL) Enter the keyword stack-unit to view CPU memory usage for the stack
member designated by unit-id. The range is 0 to 5.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line of text.
When using the pipe command ( | ), enter one of these keywords to filter command
output. Refer to CLI Basics for details on filtering commands.
save Enter the keyword save to save the command output.
74 Control and Monitoring