Users Guide

CPLD IMAGE INFORMATION :
--------------------------------------------------------------
Card CPLD Name Version
Stack-unit 1 IOM SYSTEM CPLD 6
Dell#
show running-config
Displays the current configuration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) configuration, enter one of
the following keywords:
NOTE: If you did not configure anything for that entity, nothing displays and
the prompt returns.
boot
for the current boot configuration
ftp
for the current FTP configuration
igmp
for the current IGMP configuration
interface
for the current interface configuration
line
for the current line configuration
lldp
for the current lldp configuration
logging
for the current logging configuration
management-
route
for the current Management port forwarding configuration
monitor
for the current Monitor configuration
snmp
for the current SNMP configuration
uplink-state-
group
for the uplink state group configuration
users
for the current users configuration
configured (OPTIONAL) Enter the keyword configured to display line card interfaces with non-
default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the running
configuration and the start-up configuration.
Command Modes EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
File Management 41