Users Guide

read name (OPTIONAL) Enter the keyword read then a name (a string of up to 20 characters long)
as the read view name. The default is GlobalView and is assumed to be every object
belonging to the internet (1.3.6.1) OID space.
write name (OPTIONAL) Enter the keyword write then a name (a string of up to 20 characters
long) as the write view name.
notify name (OPTIONAL) Enter the keyword notify then a name (a string of up to 20 characters
long) as the notify view name.
access access-list-
name
(Optional) Enter the standard IPv4 access list name (a string up to 16 characters long).
ipv6 access-list-
name
(Optional) Enter the keyword ipv6 then the IPv6 access list name (a string up to 16
characters long).
access-list-name
ipv6 access-list-
name
(Optional) Enter both an IPv4 and IPv6 access list name.
Defaults As above.
Command Modes CONFIGURATION
Supported Modes Programmable-Mux (PMUX)
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the M I/O Aggregator.
Usage Information The following Example specifies the group named harig as a version 3 user requiring both authentication and
encryption and read access limited to the read named rview.
NOTE: The number of configurable groups is limited to 16 groups.
Example
Dell#conf
Dell(conf)# snmp-server group harig 3 priv read rview
Dell#
Related Commands
show snmp group— displays the group name, security model, view status, and storage type of each group.
snmp-server host
Configure the recipient of an SNMP trap operation.
Syntax
snmp-server host ip-address | ipv6-address [vrf vrf-name] traps | informs
[version 1 | 2c | 3] [auth | no auth | priv] [community-string] [udp-port port-
number] [notification-type]
Simple Network Management Protocol (SNMP) and Syslog 357