Users Guide

80001F88043938373635 172.31.1.3 5008
Dell#
Related Commands snmp-server engineID — configures local and remote SNMP engines on the router.
show snmp group
Display the group name, security model, status, and storage type of each group.
Syntax
show snmp group
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Programmable-Mux (PMUX)
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the M I/O Aggregator.
Usage Information The following Example displays a group named ngroup. The ngroup has a security model of version 3 (v3) with
authentication (auth), the read and notify name is nview with no write view name specified, and finally the row
status is active.
Example
Dell#show snmp group
groupname: v1v2creadg security model: v1
readview : v1v2cdefault writeview: no write view specified
notifyview: v1v2cdefault context: no context specified
row status: active
groupname: v1v2creadg security model: v2c
readview : v1v2cdefault writeview: no write view specified
notifyview: v1v2cdefault context: no context specified
row status: active
groupname: v1v2cwriteg security model: v1
readview : v1v2cdefault writeview: v1v2cdefault
notifyview: v1v2cdefault context: no context specified
row status: active
groupname: v1v2cwriteg security model: v2c
readview : v1v2cdefault writeview: v1v2cdefault
notifyview: v1v2cdefault context: no context specified
row status: active
Dell#
Related Commands snmp-server group — configures an SNMP server group.
Simple Network Management Protocol (SNMP) and Syslog 351