Users Guide

direction {rx | tx |
both}
Enter the keyword direction followed by one of the packet directional indicators.
• rx: to monitor receiving packets only.
• tx: to monitor transmitting packets only.
• both: to monitor both transmitting and receiving packets.
Defaults none
Command Modes MONITOR SESSION (conf-mon-sess-session-ID)
Supported Modes All Modes
Command History
Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Example
Dell(conf-mon-sess-11)#source tengig 10/0 destination tengig 10/47 direction
rx
Dell(conf-mon-sess-11)#
Usage Information The monitored (source) interface must be a server-facing interface in the format slot/port, where valid slot
numbers are 0-1 and server-facing port numbers are from 1 to 32.
304 Port Monitoring