Users Guide

mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the IP
address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common
prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a configured prefix list.
process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly connected routes.
static (OPTIONAL) Enter the keyword static to view only routes configured by the ip
route command.
summary (OPTIONAL) Enter the keyword summary.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show ip route all command in the following example.
Field Description
(undefined) Identifies the type of route:
• C = connected
• S = static
• R = RIP
• B = BGP
• IN = internal BGP
• EX = external BGP
• LO = Locally Originated
• O = OSPF
• IA = OSPF inter area
• N1 = OSPF NSSA external type 1
• N2 = OSPF NSSA external type 2
• E1 = OSPF external type 1
• E2 = OSPF external type 2
• i = IS-IS
• L1 = IS-IS level-1
• L2 = IS-IS level-2
• IA = IS-IS inter-area
• * = candidate default
• > = non-active route
244
IPv4 Routing