Users Guide

show vlan
Displays the current VLAN configurations on the switch.
Syntax
show vlan [brief |id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the following information:
• VLAN ID
• VLAN name (left blank if none is configured.)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only
information on the VLAN specified is displayed
name vlan-name (OPTIONAL) Enter the keyword name followed by the name configured for the VLAN.
Only information on the VLAN named is displayed.
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All Modes
Command History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage Information The following describes the show vlan command information given in the following example
Column Heading Description
(Column 1 — no
heading)
• asterisk symbol (*) = Default VLAN
• G = GVRP VLAN
• P = primary VLAN
• C = community VLAN
• I = isolated VLAN
NUM Displays existing VLAN IDs.
Status Displays the word Inactive for inactive VLANs and the word Active for active VLANs.
Q Displays G for GVRP tagged, M for member of a VLAN-Stack VLAN, T for tagged
interface, U (for untagged interface), x (uncapitalized x) for Dot1x untagged, or X
(capitalized X) for Dot1x tagged.
Ports
Displays the type, slot, and port information. For the type, Po = port channel, Fo=
fortygigabit ethernet, and Te = ten gigabit ethernet.
Interfaces 225