Users Guide

Field Description
If ETS admin mode is enabled on the remote port for DCBX exchange, the Willing bit
received in ETS TLVs from the remote peer is included.
Local Parameters ETS configuration on local port, including admin mode (enabled when a valid TLV is
received from a peer), priority groups, assigned dot1p priorities, and bandwidth allocation.
Operational status
(local port)
Port state for current operational ETS configuration:
• Init: Local ETS configuration parameters were exchanged with the peer.
• Recommend: Remote ETS configuration parameters were received from the peer.
• Internally propagated: ETS configuration parameters were received from the
configuration source.
ETS DCBX Oper
status
Operational status of the ETS configuration on the local port: match or mismatch.
Reason Reason displayed when the DCBx operational status for ETS on a port is down.
State Machine
Type
Type of state machine used for DCBX exchanges of ETS parameters: Feature — for
legacy DCBX versions; Asymmetric — for an IEEE version.
Conf TLV Tx Status Status of ETS Configuration TLV advertisements: enabled or disabled.
ETS TLV Statistic:
Input Conf TLV
pkts
Number of ETS Configuration TLVs received.
ETS TLV Statistic:
Output Conf TLV
pkts
Number of ETS Configuration TLVs transmitted.
ETS TLV Statistic:
Error Conf TLV
pkts
Number of ETS Error Configuration TLVs received.
Example (Summary)
Dell(conf)# show interfaces te 0/1 ets summary
Interface TenGigabitEthernet 0/1
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters:
------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
0 0,1,2,3,4,5,6,7 100% ETS
1 0% ETS
2 0% ETS
3 0% ETS
4 0% ETS
5 0% ETS
6 0% ETS
7 0% ETS
Priority# Bandwidth TSA
0 13% ETS
1 13% ETS
2 13% ETS
3 13% ETS
4 12% ETS
5 12% ETS
6 12% ETS
7 12% ETS
Remote Parameters:
-------------------
Data Center Bridging (DCB)
125